Developing biofuels industry in small economies: Policy experiences and lessons from the caribbean basin initiative

With increasing concerns about rising energy demand and cost, diminishing oil reserves, and climate change, Central American and Caribbean (CAC) nations have the opportunity to become producers of low-carbon sustainable biofuels for domestic consumption and foreign exchange earnings. While the region has a number of comparative advantages for developing a vibrant biofuels sector, including favorable climate and significant agricultural experience, the experience under the favorable Caribbean Basin Initiative (CBI) has exposed significant technical and non-technical barriers that must be overcome. Using information compiled through interviews with industry executives, government policy makers and civil society stakeholders, we provide a critical analysis of this experience focusing on non-technical barriers to investment. Survey results suggest that political uncertainty, poor regulatory frameworks, and lack of institutional commitment and business incentives are the main non-technical barriers. Having laid out the challenges, we propose potential policy positions to stimulate growth of the regional biofuels sector. Results point to the need to prioritize enhancing national legislation, developing risk prevention plans, creating supply and demand side incentives and increasing multilateral collaboration. While these findings are derived from the Caribbean Basin experience, they may also be applicable to small economies in other regions that are considering policies for biofuels industry development.     

Feather Fiber Reinforced Light-Weight Composites with Good Acoustic Properties

Three to four billion pounds of chicken feathers are wasted in the United States annually. These feathers pose an environmental challenge. In order to find a commercial application of these otherwise wasted feathers, composites have been prepared from feathers. Flexural, impact resistance, and sound dampening properties of composites from chicken feather fiber (FF) and High Density Polyethylene/Polypropylene (HDPE/PP) fiber have been investigated and compared with pulverized chicken quill-HDPE/PP, and jute-HDPE/PP composites. Sound dampening by FF composites was 125% higher than jute and similar to quill although mechanical properties were inferior to the latter two. In ground form, FF and jute composite properties were similar except for 34% higher modulus of jute; under the same formulation and processing conditions, ground FF composites had nearly 50% lower mechanical properties compared with ground quill composites. It was found that voids and density of composites have effect on mechanical and sound dampening properties; however, no direct relationship was found between mechanical properties and sound dampening.     

Future-year ozone prediction for the United States using updated models and inputs

The relationship between emission reductions and changes in ozone can be studied using photochemical grid models. These models are updated with new information as it becomes available. The primary objective of this study was to update the previous Collet et al. studies by using the most up-to-date (at the time the study was done) modeling emission tools, inventories, and meteorology available to conduct ozone source attribution and sensitivity studies. Results show future-year, 2030, design values for 8-hr ozone concentrations were lower than base-year values, 2011. The ozone source attribution results for selected cities showed that boundary conditions were the dominant contributors to ozone concentrations at the western U.S. locations, and were important for many of the eastern U.S. locations. Point sources were generally more important in the eastern United States than in the western United States. The contributions of on-road mobile emissions were less than 5 ppb at a majority of the cities selected for analysis. The higher-order decoupled direct method (HDDM) results showed that in most of the locations selected for analysis, NOx emission reductions were more effective than VOC emission reductions in reducing ozone levels. The source attribution results from this study provide useful information on the important source categories and provide some initial guidance on future emission reduction strategies.

Implications: The relationship between emission reductions and changes in ozone can be studied using photochemical grid models, which are updated with new available information. This study was to update the previous Collet et al. studies by using the most current, at the time the study was done, models and inventory to conduct ozone source attribution and sensitivity studies. The source attribution results from this study provide useful information on the important source categories and provide some initial guidance on future emission reduction strategies.     

Alumina-supported oxime for the degradation of sarin and diethylchlorophosphate

1-(4-Chlorophenyl))-N-hydroxymethanimine and cyclohexyl-N-hydroxymethanimine were synthesized and a well-established oxime, i.e., 2-[(hydroxyimino)methyl]-1-methylpyridinium chloride was purchased. Thereafter; all were loaded over Al₂O₃ using incipient wetness technique. The prepared systems were characterized using surface area analyzer, scanning electron microscope, energy dispersive X-ray spectrophotometer, Fourier transform infrared spectrophotometer and thermogravimetric analyzer. Kinetics of the degradation of sarin (GB) and simulant, i.e. diethylchlorophosphate (DEClP) was studied over synthesized oxime impregnated Al₂O₃ and results were compared with well reported oxime impregnated Al₂O₃. Kinetics of reaction was found to be following the pseudo first order reaction kinetics. The order of reactivity of the prepared systems was found to be cyclohexyl-N-hydroxymethanimine/Al₂O₃ > 1-(4-chlorophenyl)-N-hydroxymethanimine/Al₂O₃ > 2-[(hydroxyimino)methyl]-1-methylpyridinium chloride/Al₂O₃ > Al₂O₃. From the reaction kinetics it was observed that the reaction with DEClP was faster than with GB. Cyclohexyl-N-hydroxymethanimine/Al₂O₃ was found to be the most reactive system with half-life of 0.94 and 15 h for DEClP and GB respectively.     

Low mating frequency of queens in the stingless bee<Emphasis Type="Italic"> Scaptotrigona postica</Emphasis><Superscript>1</Superscript> and worker maternity of males

Kin selection models of intracolonial conflict over the maternity of males predict that social hymenopteran workers should favour the production of sons and nephews over brothers when the effective mating frequency (m_e) of the queen is low (m_e<2) but that they should police other workers' reproductive efforts and favour the production of brothers when m_e>2. Stingless bees have been used to support these models in that m_e within the group is considered low and workers are thought often to monopolise the parentage of males. We genetically analysed 20 worker and 20 male pupae from each of 10 colonies of the stingless bee Scaptotrigona postica (= Scaptotrigona aff. depilis) using six microsatellite loci and demonstrate queen monandry in eight nests and apparent low m_e in the other two. However, four colonies contained an additional matriline, possibly due to queen supersedure (serial polygyny), which complicated their genetic structure. Across colonies, workers were responsible for the maternity of 13% of all males. These data are broadly in agreement with predictions from kin selection theory, though the question remains open as to why workers do not secure a greater share of male maternity in this and other stingless bee species in which workers are more closely related to nephews than brothers.     

Assessment of chemical process hazards in early design stages

A new method called SREST-layer-assessment method with automated software tool is presented that in a hierarchical approach reveals the degree of non-ideality of chemical processes with regard to SHE (safety, health and environment) aspects at different layers: the properties of the chemical substances involved (substance assessment layer (SAL)), possible interactions between the substances (reactivity assessment layer (RAL)), possible hazard scenarios resulting from the combination of substances and operating conditions in the various equipments involved (equipment assessment layer (EAL)), and the safety technologies that are required to run a process safely and in accordance with legal regulations (safety-technology assessment layer (STAL)). In RAL, EAL and STAL the main focus is put on process safety. A case study is used to show the principles of the method. It is demonstrated how the method can be used as a systematic tool to support chemical engineers and chemists in evaluating chemical process safety in early process development stages.     

Determination of organophosphorus fire retardants and plasticizers in wastewater samples using MAE-SPME with GC-ICPMS and GC-TOFMS detection

Determination of organophosphorus fire retardants and plasticizers at trace levels in wastewater is described. In this work, microwave assisted extraction (MAE) and solid-phase microextraction (SPME) are used for sample preparation to extract and preconcentrate the analytes, followed by analysis by gas chromatography coupled to inductively coupled plasma mass spectrometry (GC-ICP-MS) for phosphorus-specific detection. Gas chromatography coupled to time of flight mass spectrometry (GC-TOF-MS) was used to confirm the organphosphorus fire retardants in wastewater. The detection limits of organophosphorus fire retardants (OPFRs) were 29 ng L(-1) for tri-n-butyl phosphate (TnBP), 45 ng for L(-1) for tris(2-butoxyethyl)phosphate (TBEP), and 50 ng L(-1) for tris(2-ethylhexyl)phosphate (TEHP). Optimized extraction conditions were performed at 65 degrees C for 30 min and with 10% NaCl. Application of MAE during the sample preparation prior to the SPME allowed the detection of tris(2-ethylhexyl) phosphate, which has been difficult to determine in previous work. Application of the method to wastewater samples resulted in detecting 3.1 microg L(-1) P from TnBP, 5.0 microg L(-1) P from TBEP, and 4.0 microg L(-1) P from TEHP. The presence of these compounds were also confirmed by SPME-GC-TOF-MS.     

Tolerance of transgenic canola plants (Brassica napus) amended with plant growth-promoting bacteria to flooding stress at a metal-contaminated field site

The growth of transgenic canola (Brassica napus) expressing a gene for the enzyme 1-aminocyclopropane-1-carboxylate (ACC) deaminase was compared to non-transformed canola exposed to flooding and elevated soil Ni concentration, in situ. In addition, the ability of the plant growth-promoting bacterium Pseudomonas putida UW4, which also expresses ACC deaminase, to facilitate the growth of non-transformed and transgenic canola under the above mentioned conditions was examined. Transgenic canola and/or canola treated with P. putida UW4 had greater shoot biomass compared to non-transformed canola under low flood-stress conditions. Under high flood-stress conditions, shoot biomass was reduced and Ni accumulation was increased in all instances relative to low flood-stress conditions. This is the first field study to document the increase in plant tolerance utilizing transgenic plants and plant growth-promoting bacteria exposed to multiple stressors.